Connect

8 clients · secrets stay placeholders

JSON (mcpServers)Claude CodeCodexOpenCodeCursorVS CodeGemini CLIGoose

{
  "mcpServers": {
    "print": {
      "type": "http",
      "url": "https://formnord.no/mcp"
    }
  }
}

claude mcp add --transport http print https://formnord.no/mcp

[mcp_servers.print]
url = "https://formnord.no/mcp"

{
  "$schema": "https://opencode.ai/config.json",
  "mcp": {
    "print": {
      "type": "remote",
      "url": "https://formnord.no/mcp",
      "enabled": true
    }
  }
}

{
  "mcpServers": {
    "print": {
      "type": "http",
      "url": "https://formnord.no/mcp"
    }
  },
  "deeplink": "cursor://anysphere.cursor-deeplink/mcp/install?name=print&config=eyJ0eXBlIjoiaHR0cCIsInVybCI6Imh0dHBzOi8vZm9ybW5vcmQubm8vbWNwIn0%3D"
}

{
  "servers": {
    "print": {
      "type": "http",
      "url": "https://formnord.no/mcp"
    }
  }
}

{
  "mcpServers": {
    "print": {
      "httpUrl": "https://formnord.no/mcp"
    }
  }
}

extensions:
  "print":
    enabled: true
    name: "print"
    type: streamable_http
    uri: "https://formnord.no/mcp"
    timeout: 300

Quality 85 / 100new

protocol75 · weight 25

warn
protocol.modernnewest supported version is 2025-11-25; 2026-07-28 not supported, older versions are deprecated until 2027-07-28
n/a
protocol.statelessonly applies to 2026-07-28 servers
pass
protocol.transportstreamable HTTP
n/a
protocol.list_ttlonly applies to 2026-07-28 servers

authorizationn/a · weight 15

n/a
auth.prm, auth.as_metadata, auth.cimdno remote uses OAuth
n/a
auth.secret_in_urlno templated URL

tool hygiene93 · weight 30

pass
tools.descriptionsevery tool has a description
pass
tools.description_lengthdescriptions are concise
pass
tools.schemasevery tool has an object input schema
pass
tools.annotations5 of 5 tools declare readOnlyHint or destructiveHint
warn
tools.directory_hints3 of 5 tools declare all four hints; missing: get_quote_status (destructiveHint, idempotentHint); get_print_service_info (destructiveHint, idempotentHint)
pass
tools.token_costabout 1,396 tokens to load every tool
pass
tools.api_dumptools are not a one-to-one API dump

stabilityn/a · weight 15

n/a
stability.changes, stability.rug_pulltool history recorded for 3 of the 7 days needed

dependenciesn/a · weight 15

n/a
deps.known_vulns, deps.mcp_sdk_version, deps.resolvableno npm or PyPI package

5 tools, about 1,396 tokens to load them all · tool set bc2aaf786f78 · tools last changed 2026-10-17 · checked 2026-10-20 12:45 UTC

Tool changes

2026-10-17create_orderchangeddescription
before
Place an order for a quote on the user's behalf and get a payment link. Only call this after the user has given you their details and explicitly confirmed that they accept the terms (https://formnord.no/print/vilkar) and have the right to use the model. Returns payment_url, which the user opens to pay with Vipps or card (the order is not paid until they do). Calling it again for the same quote returns the same order. Delivery address must be in Norway.
after · 85% of words in common
Place an order for a quote on the user's behalf and get a payment link. Only call this after the user has given you their details and explicitly confirmed that they accept the terms (https://formnord.no/print/vilkar) and have the right to use the model. Returns payment_url, which the user opens to pay with Vipps or card (the order is not paid until they do). Calling it again for the same quote returns the same order. Delivery address must be in Norway. If kode is price_pending, slicing is still confirming the price: wait a minute (or poll get_quote_status) and call again.
2026-10-17create_upload_linkchangeddescription
before
Create a one-time upload page for the user's model file, for when the user has the file (attached in chat or on their device) and you cannot pass its contents to get_print_quote. Give the user upload_url; when they say it is uploaded, call get_print_quote with upload_id. The link is valid for 24 hours.
after · 78% of words in common
Create a one-time upload page for the user's model file, for when the user has the file (attached in chat or on their device) and you cannot pass its contents to get_print_quote. Give the user upload_url; when they say it is uploaded, call get_print_quote with upload_id. Accepts STL, 3MF or zip up to 500 MB (large models are simplified automatically for pricing). The link is valid for 24 hours.
2026-10-17get_print_quotechangedinput schema

Full history: list_changes · trend: quality JSON.

Checks run on what our credential-free, read-only probes observe; tools are never called and no code audit is performed. How it is computed.

Trust 83 / 100

no-repository

provenance55

liveness100

freshness100

hygiene80

+dns-namespace +website +reachable +uptime-100% +updated-4d-ago -no-repository

Derived from observable signals (official registry feed and our own credential-free probes); no code audit performed. How it is computed.

Endpoints

remote	auth	reachable	uptime 30d	p50	protocol	last ok
`https://formnord.no/mcp` streamable-http	none	yes	100%	657 ms	2025-11-25	2026-10-20

Tools (5)

`create_order`	Place an order for a quote on the user's behalf and get a payment link. Only call this after the user has given you their details and explicitly confirmed that they accept the terms (https://formnord.no/print/vilkar) and have the right to use the model. Returns payment_url, which the user opens to pay with Vipps or card (the order is not paid until they do). Calling it again for the same quote returns the same order. Delivery address must be in Norway. If kode is price_pending, slicing is still confirming the price: wait a minute (or poll get_quote_status) and call again.
`create_upload_link`	Create a one-time upload page for the user's model file, for when the user has the file (attached in chat or on their device) and you cannot pass its contents to get_print_quote. Give the user upload_url; when they say it is uploaded, call get_print_quote with upload_id. Accepts STL, 3MF or zip up to 500 MB (large models are simplified automatically for pricing). The link is valid for 24 hours.
`get_print_quote`	Get an instant price for printing a 3D model (STL, 3MF, or a zip containing them, max 300 mm on the longest side) and shipping it within Norway. Provide exactly one of file_url, file_base64, stl_text, upload_id (from create_upload_link) or file_id. Returns tilbud_id (the quote_id), total price in NOK with breakdown, estimated weight and print time, and bestill_url: a page where the user can order themselves. To order on the user's behalf, use create_order. The quote is valid for 14 days.
`get_print_service_info`read-only	Returns FormNord 3D printing service details: materials (PETG, ABS) and colours, infill options (15 light / 20 standard / 40 strong / 100 solid %), print settings, maximum size, pricing model, shipping options and delivery time. Delivery to Norway only.
`get_quote_status`read-only	Look up an earlier quote by quote_id: price, whether it has expired, whether it has been ordered, and the order status (awaiting payment, queued, shipped).

Schemas: list_tools.

Similar MCP servers

Official server.json

{
  "name": "no.formnord/print",
  "title": "FormNord 3D printing",
  "$schema": "https://static.modelcontextprotocol.io/schemas/2025-12-11/server.schema.json",
  "remotes": [
    {
      "url": "https://formnord.no/mcp",
      "type": "streamable-http"
    }
  ],
  "version": "1.1.0",
  "websiteUrl": "https://formnord.no/print/ai",
  "description": "Quote and order 3D prints (PETG/ABS) from STL/3MF files, printed and shipped in Norway."
}