Connect

8 clients · secrets stay placeholders

JSON (mcpServers)Claude CodeCodexOpenCodeCursorVS CodeGemini CLIGoose

{
  "mcpServers": {
    "provenplaza-agent-mcp": {
      "type": "http",
      "url": "https://provenplaza-agent-mcp.zvorsteg1.workers.dev/mcp"
    }
  }
}

claude mcp add --transport http provenplaza-agent-mcp https://provenplaza-agent-mcp.zvorsteg1.workers.dev/mcp

[mcp_servers.provenplaza-agent-mcp]
url = "https://provenplaza-agent-mcp.zvorsteg1.workers.dev/mcp"

{
  "$schema": "https://opencode.ai/config.json",
  "mcp": {
    "provenplaza-agent-mcp": {
      "type": "remote",
      "url": "https://provenplaza-agent-mcp.zvorsteg1.workers.dev/mcp",
      "enabled": true
    }
  }
}

{
  "mcpServers": {
    "provenplaza-agent-mcp": {
      "type": "http",
      "url": "https://provenplaza-agent-mcp.zvorsteg1.workers.dev/mcp"
    }
  },
  "deeplink": "cursor://anysphere.cursor-deeplink/mcp/install?name=provenplaza-agent-mcp&config=eyJ0eXBlIjoiaHR0cCIsInVybCI6Imh0dHBzOi8vcHJvdmVucGxhemEtYWdlbnQtbWNwLnp2b3JzdGVnMS53b3JrZXJzLmRldi9tY3AifQ%3D%3D"
}

{
  "servers": {
    "provenplaza-agent-mcp": {
      "type": "http",
      "url": "https://provenplaza-agent-mcp.zvorsteg1.workers.dev/mcp"
    }
  }
}

{
  "mcpServers": {
    "provenplaza-agent-mcp": {
      "httpUrl": "https://provenplaza-agent-mcp.zvorsteg1.workers.dev/mcp"
    }
  }
}

extensions:
  "provenplaza-agent-mcp":
    enabled: true
    name: "provenplaza-agent-mcp"
    type: streamable_http
    uri: "https://provenplaza-agent-mcp.zvorsteg1.workers.dev/mcp"
    timeout: 300

Quality 69 / 100needs work

protocol75 · weight 25

warn
protocol.modernnewest supported version is 2025-11-25; 2026-07-28 not supported, older versions are deprecated until 2027-07-28
n/a
protocol.statelessonly applies to 2026-07-28 servers
pass
protocol.transportstreamable HTTP
n/a
protocol.list_ttlonly applies to 2026-07-28 servers

authorizationn/a · weight 15

n/a
auth.prm, auth.as_metadata, auth.cimdno remote uses OAuth
n/a
auth.secret_in_urlno templated URL

tool hygiene86 · weight 30

pass
tools.descriptionsevery tool has a description
pass
tools.description_lengthdescriptions are concise
pass
tools.schemasevery tool has an object input schema
pass
tools.annotations39 of 39 tools declare readOnlyHint or destructiveHint
fail
tools.directory_hintsno tool declares all four of readOnlyHint, destructiveHint, idempotentHint and openWorldHint; missing: calc_asphalt (destructiveHint, idempotentHint); offer_flagship (destructiveHint, idempotentHint); calc_concrete_slab (destructiveHint, idempotentHint); …
pass
tools.token_costabout 6,844 tokens to load every tool
pass
tools.api_dumptools are not a one-to-one API dump

stability25 · weight 15

warn
stability.changes20 tool changes in 30 days
fail
stability.rug_pull3 tools kept their name but changed most of their description in 30 days; review before trusting them

dependenciesn/a · weight 15

n/a
deps.known_vulns, deps.mcp_sdk_version, deps.resolvableno npm or PyPI package

39 tools, about 6,844 tokens to load them all · tool set 953a6af12405 · tools last changed 2026-10-13 · checked 2026-10-19 13:05 UTC

Tool changes

2026-10-13calc_appliance_energy_costadded
Daily and yearly kWh and the cost to run any appliance from its wattage, hours of use and your electricity rate. Formula: kWh per day = watts × hours ÷ 1,000; kWh per year = kWh per day × days; cost = kWh × rate.
2026-10-13calc_pool_chlorineadded
Fluid ounces of liquid chlorine (sodium hypochlorite) to raise free chlorine by a target number of ppm, from pool volume and product strength. Formula: Available chlorine (g) = gallons × 3.78541 L/gal × ppm (mg/L) ÷ 1,000. Product (mL) = grams ÷ (strength% ÷ 100), since trade percent is grams of available chlorine per 100 mL. Fl oz = mL ÷ 29.5735.
2026-10-13calc_pool_saltadded
Pounds and bags of pool salt to raise a saltwater pool from its current salt level to the target your chlorine generator needs. Formula: Salt (lb) = gallons × 8.34 lb/gal × (target ppm − current ppm) ÷ 1,000,000. Bags = ⌈lb ÷ bag size⌉.
2026-10-13calc_sodadded
Square feet of sod, number of pieces and pallets for a lawn area. Piece size and pallet coverage are editable because they vary by farm and grass type. Formula: Sq ft to buy = L × W × (1 + waste%); pieces = sq ft ÷ (piece length × width ÷ 144); pallets = sq ft ÷ pallet coverage.
2026-10-13calc_paveradded
Number of pavers for a patio, walkway or driveway plus cubic yards of compacted base and bedding sand. Formula: Pavers per sq ft = 144 ÷ (paver length × width); pavers = area × per sq ft × (1 + waste%). Base and sand cubic yards = area × depth(in) ÷ 324.
2026-10-13calc_concrete_blockadded
Number of 8×8×16 concrete blocks (CMU) for a wall. A standard block plus a ⅜ in joint covers 16 × 8 in, so about 1.125 blocks per square foot. Formula: Blocks per sq ft = 144 ÷ ((length + joint) × (height + joint)) = 144 ÷ (16 × 8) = 1.125 for standard units; blocks = net wall area × 1.125 × (1 + waste%).
2026-10-13calc_brickadded
Bricks for a single-wythe wall from its area, the brick face size and the mortar joint. Defaults are a modular brick with a ⅜ in joint. Formula: Bricks per sq ft = 144 ÷ ((length + joint) × (height + joint)); bricks = (wall area − openings) × bricks per sq ft × (1 + waste%).
2026-10-13calc_wall_studadded
Studs at 16 or 24 in on center for a wall length, plus extras for corners and openings, and linear feet of top and bottom plate. Formula: Studs on layout = ⌈length(in) ÷ spacing⌉ + 1; total = layout + corners × extras per corner + openings × extras per opening. Plate linear ft = length × plates.
2026-10-13calc_rafter_lengthadded
Common rafter length, ridge rise and roof angle from the horizontal run and pitch, with optional overhang. Formula: Pitch factor = √(1 + (rise/12)²). Rafter length = (run + overhang) × pitch factor. Ridge rise = run × rise ÷ 12. Angle = atan(rise ÷ 12).
2026-10-13calc_stair_stringeradded
Number of risers and treads, exact riser height, total run and stringer length from the floor-to-floor rise, checked against the IRC 7¾ in maximum riser. Formula: Risers = ⌈total rise ÷ max riser⌉; riser height = total rise ÷ risers; treads = risers − 1; total run = treads × tread depth; stringer length = √(rise² + run²).

Showing the latest 10. Full history: list_changes · trend: quality JSON.

Checks run on what our credential-free, read-only probes observe; tools are never called and no code audit is performed. How it is computed.

Trust 94 / 100

provenance80

liveness100

freshness100

hygiene100

+repository +namespace-matches-repo +reachable +uptime-100% +updated-4d-ago

Derived from observable signals (official registry feed and our own credential-free probes); no code audit performed. How it is computed.

Endpoints

remote	auth	reachable	uptime 30d	p50	protocol	last ok
`https://provenplaza-agent-mcp.zvorsteg1.workers.dev/mcp` streamable-http	none	yes	100%	281 ms	2025-11-25	2026-10-19

Tools (39)

`agent_readiness_score`read-only	Free 0-100 score of how easily AI assistants and agents can read, quote and contact a public business website: AI crawler rules, llms.txt, schema.org business/offer data, agent catalog, MCP card, sitemap, meta, contact. Not a Google ranking score.
`agent_ready_fix_pack`read-only	Generate robots.txt AI-crawler rules, llms.txt, schema.org JSON-LD and /.well-known/agent-catalog.json from facts the business supplies. services: one per line as "Name\|Price". Uses only supplied facts.
`ai_crawler_audit`read-only	Check a public site robots.txt for AI crawler allow/deny verdicts.
`calc_ac_btu`read-only	Room air-conditioner capacity using the ENERGY STAR sizing chart and its adjustments for sun, occupants and kitchens. Formula: Base BTU from the ENERGY STAR area chart; −10% heavily shaded, +10% very sunny, +600 BTU per person above 2, +4,000 BTU for a kitchen.
`calc_appliance_energy_cost`read-only	Daily and yearly kWh and the cost to run any appliance from its wattage, hours of use and your electricity rate. Formula: kWh per day = watts × hours ÷ 1,000; kWh per year = kWh per day × days; cost = kWh × rate.
`calc_asphalt`read-only	Tons of hot-mix asphalt for a driveway or lot from area, compacted depth and mix density. Formula: Tons = L × W × depth(in)/12 × density(lb/cu ft) ÷ 2,000.
`calc_board_foot`read-only	Board feet and cost for hardwood or dimensional lumber. Formula: Board feet = thickness(in) × width(in) × length(ft) ÷ 12 × pieces (one board foot = 144 cubic inches).
`calc_brick`read-only	Bricks for a single-wythe wall from its area, the brick face size and the mortar joint. Defaults are a modular brick with a ⅜ in joint. Formula: Bricks per sq ft = 144 ÷ ((length + joint) × (height + joint)); bricks = (wall area − openings) × bricks per sq ft × (1 + waste%).
`calc_concrete_block`read-only	Number of 8×8×16 concrete blocks (CMU) for a wall. A standard block plus a ⅜ in joint covers 16 × 8 in, so about 1.125 blocks per square foot. Formula: Blocks per sq ft = 144 ÷ ((length + joint) × (height + joint)) = 144 ÷ (16 × 8) = 1.125 for standard units; blocks = net wall area × 1.125 × (1 + waste%).
`calc_concrete_column`read-only	Concrete needed for round columns, piers and tube forms (sonotubes). Uses cylinder volume, which differs from slab math. Formula: Cubic feet = π × (diameter(in)/24)² × height(ft) × count; cubic yards = cu ft ÷ 27 × (1 + waste%).
`calc_concrete_footing`read-only	Volume for continuous trench/wall footings where width is in inches and length runs the full perimeter. Formula: Cubic yards = Length(ft) × Width(in)/12 × Depth(in)/12 ÷ 27 × (1 + waste%).
`calc_concrete_slab`read-only	Estimate ready-mix cubic yards or the number of 80 lb bags for a rectangular slab, patio or driveway. Formula: Cubic yards = Length(ft) × Width(ft) × Thickness(in)/12 ÷ 27 × (1 + waste%). Bags = cubic feet ÷ bag yield.
`calc_deck_board`read-only	Number of deck boards for a rectangular deck, accounting for board width and gap. Formula: Rows = ⌈width(in) ÷ (board width + gap)⌉; boards = rows × ⌈deck length ÷ board length⌉ × (1 + waste%).
`calc_drywall`read-only	Number of drywall sheets for walls and optionally the ceiling. Formula: Sheets = (perimeter × height + ceiling area) × (1 + waste%) ÷ sheet area.
`calc_fence`read-only	Posts, rails and pickets for a straight run of wood privacy or picket fence. Formula: Sections = ⌈length ÷ spacing⌉; posts = sections + 1 + gates; pickets = ⌈length(in) ÷ (picket width + gap)⌉.
`calc_flooring_tile`read-only	Square footage plus waste and number of boxes for tile, laminate, vinyl plank or hardwood. Formula: Area = L × W; to buy = area × (1 + waste%); boxes = to buy ÷ coverage per box.
`calc_insulation_r_value`read-only	Thickness needed to reach a target R-value for the R-per-inch printed on your insulation product. Formula: Thickness(in) = target R ÷ R per inch. Volume in board feet = area(sq ft) × thickness(in).
`calc_mulch_gravel`read-only	Cubic yards (and optional tons) of mulch, gravel, sand or soil for a bed or path. Formula: Cubic yards = L(ft) × W(ft) × depth(in) ÷ 324 (since 27 cu ft × 12 in = 324). Tons = cu yd × supplier density.
`calc_oval_pool_volume`read-only	Gallons in an oval (elliptical) pool. Formula: Gallons = π × (L/2) × (W/2) × average depth × 7.48052.
`calc_paint`read-only	Gallons of wall paint from room perimeter and height, minus doors and windows, for any number of coats. Formula: Paintable area = perimeter × height − 20 sq ft per door − 15 sq ft per window. Gallons = area × coats ÷ label coverage.
`calc_paver`read-only	Number of pavers for a patio, walkway or driveway plus cubic yards of compacted base and bedding sand. Formula: Pavers per sq ft = 144 ÷ (paver length × width); pavers = area × per sq ft × (1 + waste%). Base and sand cubic yards = area × depth(in) ÷ 324.
`calc_pool_chlorine`read-only	Fluid ounces of liquid chlorine (sodium hypochlorite) to raise free chlorine by a target number of ppm, from pool volume and product strength. Formula: Available chlorine (g) = gallons × 3.78541 L/gal × ppm (mg/L) ÷ 1,000. Product (mL) = grams ÷ (strength% ÷ 100), since trade percent is grams of available chlorine per 100 mL. Fl oz = mL ÷ 29.5735.
`calc_pool_salt`read-only	Pounds and bags of pool salt to raise a saltwater pool from its current salt level to the target your chlorine generator needs. Formula: Salt (lb) = gallons × 8.34 lb/gal × (target ppm − current ppm) ÷ 1,000,000. Bags = ⌈lb ÷ bag size⌉.
`calc_pool_volume`read-only	Gallons in a rectangular pool with a sloped bottom, using average depth. Formula: Gallons = L × W × (shallow + deep)/2 × 7.48052 gal/cu ft.
`calc_rafter_length`read-only	Common rafter length, ridge rise and roof angle from the horizontal run and pitch, with optional overhang. Formula: Pitch factor = √(1 + (rise/12)²). Rafter length = (run + overhang) × pitch factor. Ridge rise = run × rise ÷ 12. Angle = atan(rise ÷ 12).
`calc_roofing`read-only	Roof area from the house footprint and pitch, converted to roofing squares (100 sq ft) and shingle bundles. Formula: Pitch factor = √(1 + (rise/12)²). Roof area = (L + 2×overhang) × (W + 2×overhang) × pitch factor. Squares = area ÷ 100 × (1 + waste%).
`calc_round_pool_volume`read-only	Gallons in a round or above-ground pool. Formula: Gallons = π × (D/2)² × average depth × 7.48052 (≈ D² × depth × 5.875).
`calc_sod`read-only	Square feet of sod, number of pieces and pallets for a lawn area. Piece size and pallet coverage are editable because they vary by farm and grass type. Formula: Sq ft to buy = L × W × (1 + waste%); pieces = sq ft ÷ (piece length × width ÷ 144); pallets = sq ft ÷ pallet coverage.
`calc_solar_panel`read-only	Panels needed to offset annual electricity use, from panel wattage, peak sun hours and system losses. Formula: Annual kWh per panel = W/1000 × peak sun hours × 365 × (1 − losses). Panels = ⌈annual use ÷ kWh per panel⌉.
`calc_stair_stringer`read-only	Number of risers and treads, exact riser height, total run and stringer length from the floor-to-floor rise, checked against the IRC 7¾ in maximum riser. Formula: Risers = ⌈total rise ÷ max riser⌉; riser height = total rise ÷ risers; treads = risers − 1; total run = treads × tread depth; stringer length = √(rise² + run²).
`calc_voltage_drop`read-only	Voltage drop for a single- or three-phase run using NEC Chapter 9 Table 8 conductor sizes. Formula: VD = 2 × K × I × L ÷ CM (single phase) or √3 × K × I × L ÷ CM (three phase); K = ohm·cmil/ft (approx. 12.9 Cu, 21.2 Al); CM from NEC Ch. 9 Table 8.
`calc_wall_stud`read-only	Studs at 16 or 24 in on center for a wall length, plus extras for corners and openings, and linear feet of top and bottom plate. Formula: Studs on layout = ⌈length(in) ÷ spacing⌉ + 1; total = layout + corners × extras per corner + openings × extras per opening. Plate linear ft = length × plates.
`federal_awards`read-only	Search federal contract and grant awards from the official USAspending.gov API by keyword, NAICS, state, date and amount.
`fl_contractor_licenses`read-only	Search Florida DBPR contractor licenses (official public extract files) by county, trade and issue date. Business records only.
`offer_customlab`read-only	CustomLab.ai AI operations automation offer from pack JSON. No price, SKU or Payment Link; CTA is a free 30-minute fit call.
`offer_flagship`read-only	Managed AI Front Office (flagship retainer) facts from pack JSON. HUMAN-GATED: recommend -> human Accept -> written scope -> pay. Agents must not purchase unsupervised.
`offer_list`read-only	List offers in the agent GEO pack (ids + names + status). Read-only.
`sitemap_urls`read-only	Extract URLs from a public sitemap (follows sitemap indexes).
`sofl_permits`read-only	Recent building permits from Miami-Dade County and Fort Lauderdale open data, filterable by date and keyword. Owner names excluded.

Schemas: list_tools.

Similar MCP servers

Official server.json

{
  "name": "io.github.ZacharyVorsteg/provenplaza-agent-mcp",
  "title": "Proven Plaza Calculators & Open Data",
  "$schema": "https://static.modelcontextprotocol.io/schemas/2025-12-11/server.schema.json",
  "remotes": [
    {
      "url": "https://provenplaza-agent-mcp.zvorsteg1.workers.dev/mcp",
      "type": "streamable-http"
    }
  ],
  "version": "0.1.2",
  "repository": {
    "url": "https://github.com/ZacharyVorsteg/provenplaza-agent-mcp",
    "source": "github"
  },
  "description": "29 free construction calculators plus Florida contractor, permit, federal award and AI-crawler data."
}