Connect

8 clients · secrets stay placeholders

JSON (mcpServers)Claude CodeCodexOpenCodeCursorVS CodeGemini CLIGoose

{
  "mcpServers": {
    "docslicer": {
      "command": "uvx",
      "args": [
        "--from",
        "docslicer[mcp]==0.2.5",
        "docslicer-mcp",
        "docslicer==0.2.5"
      ],
      "env": {
        "DOCSLICER_MCP_ROOT": "${DOCSLICER_MCP_ROOT}",
        "DOCSLICER_MCP_ALLOW_CLAUDE_DIR": "1",
        "DOCSLICER_MCP_ALLOW_URLS": "1"
      }
    }
  }
}

claude mcp add docslicer -e "DOCSLICER_MCP_ROOT=${DOCSLICER_MCP_ROOT}" -e "DOCSLICER_MCP_ALLOW_CLAUDE_DIR=1" -e "DOCSLICER_MCP_ALLOW_URLS=1" -- uvx --from docslicer[mcp]==0.2.5 docslicer-mcp docslicer==0.2.5

[mcp_servers.docslicer]
command = "uvx"
args = ["--from", "docslicer[mcp]==0.2.5", "docslicer-mcp", "docslicer==0.2.5"]
env = { "DOCSLICER_MCP_ROOT" = "${DOCSLICER_MCP_ROOT}", "DOCSLICER_MCP_ALLOW_CLAUDE_DIR" = "1", "DOCSLICER_MCP_ALLOW_URLS" = "1" }

{
  "$schema": "https://opencode.ai/config.json",
  "mcp": {
    "docslicer": {
      "type": "local",
      "command": [
        "uvx",
        "--from",
        "docslicer[mcp]==0.2.5",
        "docslicer-mcp",
        "docslicer==0.2.5"
      ],
      "enabled": true,
      "environment": {
        "DOCSLICER_MCP_ROOT": "{env:DOCSLICER_MCP_ROOT}",
        "DOCSLICER_MCP_ALLOW_CLAUDE_DIR": "1",
        "DOCSLICER_MCP_ALLOW_URLS": "1"
      }
    }
  }
}

{
  "mcpServers": {
    "docslicer": {
      "command": "uvx",
      "args": [
        "--from",
        "docslicer[mcp]==0.2.5",
        "docslicer-mcp",
        "docslicer==0.2.5"
      ],
      "env": {
        "DOCSLICER_MCP_ROOT": "${DOCSLICER_MCP_ROOT}",
        "DOCSLICER_MCP_ALLOW_CLAUDE_DIR": "1",
        "DOCSLICER_MCP_ALLOW_URLS": "1"
      }
    }
  },
  "deeplink": "cursor://anysphere.cursor-deeplink/mcp/install?name=docslicer&config=eyJjb21tYW5kIjoidXZ4IiwiYXJncyI6WyItLWZyb20iLCJkb2NzbGljZXJbbWNwXT09MC4yLjUiLCJkb2NzbGljZXItbWNwIiwiZG9jc2xpY2VyPT0wLjIuNSJdLCJlbnYiOnsiRE9DU0xJQ0VSX01DUF9ST09UIjoiJHtET0NTTElDRVJfTUNQX1JPT1R9IiwiRE9DU0xJQ0VSX01DUF9BTExPV19DTEFVREVfRElSIjoiMSIsIkRPQ1NMSUNFUl9NQ1BfQUxMT1dfVVJMUyI6IjEifX0%3D"
}

{
  "servers": {
    "docslicer": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "--from",
        "docslicer[mcp]==0.2.5",
        "docslicer-mcp",
        "docslicer==0.2.5"
      ],
      "env": {
        "DOCSLICER_MCP_ROOT": "${DOCSLICER_MCP_ROOT}",
        "DOCSLICER_MCP_ALLOW_CLAUDE_DIR": "1",
        "DOCSLICER_MCP_ALLOW_URLS": "1"
      }
    }
  }
}

{
  "mcpServers": {
    "docslicer": {
      "command": "uvx",
      "args": [
        "--from",
        "docslicer[mcp]==0.2.5",
        "docslicer-mcp",
        "docslicer==0.2.5"
      ],
      "env": {
        "DOCSLICER_MCP_ROOT": "${DOCSLICER_MCP_ROOT}",
        "DOCSLICER_MCP_ALLOW_CLAUDE_DIR": "1",
        "DOCSLICER_MCP_ALLOW_URLS": "1"
      }
    }
  }
}

extensions:
  "docslicer":
    enabled: true
    name: "docslicer"
    type: stdio
    cmd: "uvx"
    args:
      - "--from"
      - "docslicer[mcp]==0.2.5"
      - "docslicer-mcp"
      - "docslicer==0.2.5"
    envs:
      "DOCSLICER_MCP_ROOT": "${DOCSLICER_MCP_ROOT}"
      "DOCSLICER_MCP_ALLOW_CLAUDE_DIR": "1"
      "DOCSLICER_MCP_ALLOW_URLS": "1"
    timeout: 300

This is a local package: the command runs on your machine.

Quality – / 100not scored

Not scored: fewer than three checks apply, usually because no remote answered a credential-free probe or the server is a local package.

protocoln/a · weight 25

n/a
protocol.modern, protocol.stateless, protocol.transport, protocol.list_ttlno remote answered a protocol handshake (not probed yet, unreachable, or local-only)

authorizationn/a · weight 15

n/a
auth.prm, auth.as_metadata, auth.cimdno remote uses OAuth
n/a
auth.secret_in_urlno templated URL

tool hygienen/a · weight 30

n/a
tools.descriptions, tools.description_length, tools.schemas, tools.annotations, tools.directory_hints, tools.token_cost, tools.api_dumptool list unknown (behind auth, not probed, or empty)

stabilityn/a · weight 15

n/a
stability.changes, stability.rug_pulltool list unknown

dependencies100 · weight 15

pass
deps.known_vulnsno known advisory in 21 resolved packages
n/a
deps.mcp_sdk_versionthe official MCP SDK is not in the dependency graph
pass
deps.resolvable[email protected] resolved: 21 packages

Tool list unknown · checked 2026-10-19 14:42 UTC

Tool changes

No tool definition changes recorded. A server's first observation is its baseline; later probes record what changes.

Checks run on what our credential-free, read-only probes observe; tools are never called and no code audit is performed. How it is computed.

Trust 91 / 100

provenance90

livenessn/a

freshness85

hygiene100

+repository +namespace-matches-repo +website ~liveness-unmeasured ~updated-48d-ago

Derived from observable signals (official registry feed and our own credential-free probes); no code audit performed. How it is computed.

Dependencies

[email protected] PyPI20 dependencies, resolved · advisories checked 2026-10-19

No known advisory affects this dependency graph.

Dependency graphs from deps.dev; advisories from OSV.dev, including the GitHub Advisory Database and the PyPI Advisory Database; all CC BY 4.0. The graph is what a clean install of this version resolves today; nothing was installed or run. How it is checked.

Endpoints

package	registry	version	runtime	secrets
`https://github.com/DocSlicer/DocSlicer/releases/download/v0.2.5/docslicer-0.2.5.mcpb`	mcpb	0.2.5	–
`docslicer`	pypi	0.2.5	uvx

Tools (0)

No tools observed. Local packages are never executed by the registry.

Schemas: list_tools.

Similar MCP servers

Official server.json

{
  "name": "io.github.DocSlicer/docslicer",
  "icons": [
    {
      "src": "https://raw.githubusercontent.com/DocSlicer/DocSlicer/main/extension/icon-512.png",
      "sizes": [
        "512x512"
      ],
      "mimeType": "image/png"
    }
  ],
  "title": "DocSlicer",
  "$schema": "https://static.modelcontextprotocol.io/schemas/2025-12-11/server.schema.json",
  "version": "0.2.5",
  "packages": [
    {
      "version": "0.2.5",
      "transport": {
        "type": "stdio"
      },
      "fileSha256": "105d15c612b04e2b5c06970d357527669284f341fa6d9c23ee3e97ef60deafcf",
      "identifier": "https://github.com/DocSlicer/DocSlicer/releases/download/v0.2.5/docslicer-0.2.5.mcpb",
      "registryType": "mcpb",
      "environmentVariables": [
        {
          "name": "DOCSLICER_MCP_ROOT",
          "format": "filepath",
          "isRequired": true,
          "description": "Restrict file sources and outputs to this directory tree. Several may be given, separated by the platform path separator."
        },
        {
          "name": "DOCSLICER_MCP_ALLOW_CLAUDE_DIR",
          "default": "1",
          "description": "Set to 0 to refuse documents dropped into a Claude chat, which the app copies into its own directory outside DOCSLICER_MCP_ROOT."
        },
        {
          "name": "DOCSLICER_MCP_ALLOW_URLS",
          "default": "1",
          "description": "Set to 0 to reject http(s) sources and only permit local files."
        }
      ]
    },
    {
      "version": "0.2.5",
      "transport": {
        "type": "stdio"
      },
      "identifier": "docslicer",
      "runtimeHint": "uvx",
      "registryType": "pypi",
      "registryBaseUrl": "https://pypi.org",
      "runtimeArguments": [
        {
          "name": "--from",
          "type": "named",
          "value": "docslicer[mcp]==0.2.5",
          "isRequired": true
        },
        {
          "type": "positional",
          "value": "docslicer-mcp",
          "isRequired": true
        }
      ],
      "environmentVariables": [
        {
          "name": "DOCSLICER_MCP_ROOT",
          "format": "filepath",
          "isRequired": true,
          "description": "Restrict file sources and outputs to this directory tree. Several may be given, separated by the platform path separator."
        },
        {
          "name": "DOCSLICER_MCP_ALLOW_CLAUDE_DIR",
          "default": "1",
          "description": "Set to 0 to refuse documents dropped into a Claude chat, which the app copies into its own directory outside DOCSLICER_MCP_ROOT."
        },
        {
          "name": "DOCSLICER_MCP_ALLOW_URLS",
          "default": "1",
          "description": "Set to 0 to reject http(s) sources and only permit local files."
        }
      ]
    }
  ],
  "repository": {
    "url": "https://github.com/DocSlicer/DocSlicer",
    "source": "github"
  },
  "websiteUrl": "https://docslicer.ai",
  "description": "Answer questions from documents too large to fit in context, reading only the sections you need."
}