Connect

8 clients · secrets stay placeholders

JSON (mcpServers)Claude CodeCodexOpenCodeCursorVS CodeGemini CLIGoose

{
  "mcpServers": {
    "engscript": {
      "type": "http",
      "url": "https://engscript.com/mcp"
    }
  }
}

claude mcp add --transport http engscript https://engscript.com/mcp

[mcp_servers.engscript]
url = "https://engscript.com/mcp"

{
  "$schema": "https://opencode.ai/config.json",
  "mcp": {
    "engscript": {
      "type": "remote",
      "url": "https://engscript.com/mcp",
      "enabled": true
    }
  }
}

{
  "mcpServers": {
    "engscript": {
      "type": "http",
      "url": "https://engscript.com/mcp"
    }
  },
  "deeplink": "cursor://anysphere.cursor-deeplink/mcp/install?name=engscript&config=eyJ0eXBlIjoiaHR0cCIsInVybCI6Imh0dHBzOi8vZW5nc2NyaXB0LmNvbS9tY3AifQ%3D%3D"
}

{
  "servers": {
    "engscript": {
      "type": "http",
      "url": "https://engscript.com/mcp"
    }
  }
}

{
  "mcpServers": {
    "engscript": {
      "httpUrl": "https://engscript.com/mcp"
    }
  }
}

extensions:
  "engscript":
    enabled: true
    name: "engscript"
    type: streamable_http
    uri: "https://engscript.com/mcp"
    timeout: 300

Quality 73 / 100needs work

protocol75 · weight 25

warn
protocol.modernnewest supported version is 2025-06-18; 2026-07-28 not supported, older versions are deprecated until 2027-07-28
n/a
protocol.statelessonly applies to 2026-07-28 servers
pass
protocol.transportstreamable HTTP
n/a
protocol.list_ttlonly applies to 2026-07-28 servers

authorizationn/a · weight 15

n/a
auth.prm, auth.as_metadata, auth.cimdno remote uses OAuth
n/a
auth.secret_in_urlno templated URL

tool hygiene57 · weight 30

pass
tools.descriptionsevery tool has a description
pass
tools.description_lengthdescriptions are concise
pass
tools.schemasevery tool has an object input schema
fail
tools.annotationsno tool declares readOnlyHint or destructiveHint, so clients cannot tell safe calls from risky ones
fail
tools.directory_hintsno tool declares all four of readOnlyHint, destructiveHint, idempotentHint and openWorldHint; missing: CARBON (readOnlyHint, destructiveHint, idempotentHint, openWorldHint); PTV (readOnlyHint, destructiveHint, idempotentHint, openWorldHint); MtoV (readOnlyHint, destructiveHint, idempotentHint, openWorldHint); …
fail
tools.token_costabout 27,082 tokens to load every tool, a large share of an agent's context
pass
tools.api_dumptools are not a one-to-one API dump

stability100 · weight 15

pass
stability.changes2 tool changes in 30 days
pass
stability.rug_pullno tool changed its meaning under the same name

dependenciesn/a · weight 15

n/a
deps.known_vulns, deps.mcp_sdk_version, deps.resolvableno npm or PyPI package

60 tools, about 27,082 tokens to load them all · tool set bf83ca275a93 · tools last changed 2026-10-11 · checked 2026-10-19 10:52 UTC

Tool changes

2026-10-11PINCHSOLVERadded
Pinch analysis (minimum utilities, pinch temperatures, composite curves, grand composite curve) and heat exchanger network design by optimization solver
2026-10-11PINCHMANUALadded
Pinch analysis (minimum utilities, pinch temperatures, composite curves, grand composite curve) and heat exchanger network design by manual tick-off heuristic

Full history: list_changes · trend: quality JSON.

Checks run on what our credential-free, read-only probes observe; tools are never called and no code audit is performed. How it is computed.

Trust 77 / 100

no-repository

provenance45

liveness100

freshness85

hygiene80

+dns-namespace +reachable +uptime-100% ~updated-66d-ago -no-repository

Derived from observable signals (official registry feed and our own credential-free probes); no code audit performed. How it is computed.

Endpoints

remote	auth	reachable	uptime 30d	p50	protocol	last ok
`https://engscript.com/mcp` streamable-http	none	yes	100%	461 ms	2025-06-18	2026-10-19

Tools (60)

`advDVR`	Advanced Data Validation and Reconciliation including gross error detection and elimation
`advECONOMIC`	Advanced Economic analysis with inflation, depreciation, and tax: NPV, IRR, Simple Payback, Profitability Index, NCF
`BALANCE`	General mass/energy balance solver using GEKKO
`CARBON`	Calculate thermodynamic properties of hydrocarbon mixture. Supports hydrocarbons and non-hydrocarbon chemicals (PR EOS flash calculation).
`COMPPOLYEFF`	Calculate polytropic efficiency of compressor
`CTWRCAPA`	Cooling tower capacity evaluation
`CTWRCAPADSNTST`	Cooling tower capacity evaluation: design vs test
`CTWREVAPOR`	Cooling tower evaporation rate: mass removal rate (MR) and heat removal rate (QR)
`CTWRLG`	Cooling tower L/G ratio calculation
`CTWRNTU`	Cooling tower NTU and characteristic C value calculation
`CVGAS`	Calculate gas control valve Cv and Kv from flow conditions
`CVLIQ`	Calculate liquid control valve Cv and Kv from flow conditions
`CVSTEAM`	Calculate steam control valve Cv and Kv from flow conditions
`DESUPERHEATER`	Calculate boiler feed water flow and total flow from pressure and temperature reduction through desuperheater. Also returns the inlet/outlet/BFW specific enthalpies (h_in, h_out, h_bfw) used in the mass balance, always in Btu/lb.
`DVR`	Data Validation and Reconciliation
`ECONOMIC`	Economic analysis: NPV, IRR, Simple Payback, Profitability Index, EAC
`EMISSIONFACTOR`	Calculate CO2 emission conversion factor from gas composition
`FLUEGAS`	Calculate enthalpy of flue gas from composition
`FORMULA`	Generic formula calculator with unit conversion and IF-THEN-ELSE
`FUELGAS`	Calculate MW, LHV and HHV of fuel gas from composition
`GN2DEPRESS`	Calculate depressurization gas volume and hold time for gaseous nitrogen storage vessel
`HEXRF`	Heat exchanger fouling resistance back-calculation from shell/tube-side operating conditions.
`HPADEPRESS`	Calculate depressurization gas volume and hold time for high pressure air storage vessel
`HTRINOUTEFF`	Calculate fired heater heat duty and efficiency from inlet/outlet conditions and composition
`HTRLOSSEFF`	Calculate fired heater loss efficiency from ambient temperature, stack gas temperature and excess oxygen
`LMTD`	Calculate LMTD of heat exchanger
`LN2DEPRESS`	Calculate depressurization gas volumn abd hold time and saturation temperature for liquid nitrogen storage vessel
`MIXTURE`	Primary thermodynamic property calculator. Use this tool first for all mixture property calculations. Supports hydrocarbons and non-hydrocarbon chemicals (PR EOS flash calculation).
`MtoV`	Convert mass flow rate to volumetric flow rate at standard condition
`ORIFICEGAS`	Gas orifice sizing / differential pressure / flow rate calculation based on ISO 5167 orifice. Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.
`ORIFICELIQ`	Liquid orifice sizing / differential pressure / flow rate calculation based on ISO 5167 orifice. Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.
`PINCHMANUAL`	Pinch analysis (minimum utilities, pinch temperatures, composite curves, grand composite curve) and heat exchanger network design by manual tick-off heuristic
`PINCHSOLVER`	Pinch analysis (minimum utilities, pinch temperatures, composite curves, grand composite curve) and heat exchanger network design by optimization solver
`PIPEAIR`	Calculate compressed air pipe sizing: pipe diameter, velocity, pressure drop
`PIPEFF`	Calculate Darcy friction factor based on Reynolds number and pipe roughness
`PIPEFLOWGAS`	Calculate isothermal gas pipe flow: density, volumetric flow rate, mass flow rate from pressure drop
`PIPEFLOWLIQ`	Calculate liquid pipe flow: volumetric flow rate and mass flow rate from pressure drop
`PIPEINSUL`	Calculate optimal pipe insulation thickness to limit outer surface temperature (burn protection) and minimise heat loss. Uses cylindrical heat conduction + external convection model, solved via scipy.optimize.brentq. Returns exact minimum thickness and nearest commercial 5 mm step.
`PIPENITROGEN`	Calculate nitrogen pipe sizing: pipe diameter, velocity, pressure drop
`PIPESTEAM`	Calculate steam pipe sizing: pipe diameter, velocity, pressure drop
`PIPEWATER`	Calculate water pipe sizing: pipe diameter, velocity, pressure drop
`Pmean`	Calculate mean pressure between inlet and outlet
`PSVGAS`	Calculate required PSV (pressure safety valve) relief area for gas/vapor service per API 520
`PSVLIQ`	Calculate required PSV (pressure safety valve) relief area for liquid service per API 520
`PSVSTEAM`	Calculate required PSV (pressure safety valve) relief area for steam service per API 520
`PSYCHROMETRIC`	Psychrometric properties of moist air
`PTV`	Calculate gas molar volume using equation of state
`PUMPBHP`	Calculate pump brake horsepower
`REFRIGERANT`	Calculate refrigerant thermodynamic properties using CoolProp. Provide Fluid name and any 2 state variables from: T, P, rho, H, S, U. Returns all remaining properties: T, P, rho, H, S, U, Cp, Cv, viscosity, conductivity, molecular weight.
`SOLVE`	Solve nonlinear equations with unknown variables using fsolve
`STEAM`	Calculate thermodynamic and transport properties of steam based on IAPWS
`STEAMFLASH`	Calculate flash steam flow from pressure reduction
`STEAMLEAK`	Calculate steam leak mass flow and flow condition (CHOKED / SUBCRITICAL) based on upstream and downstream conditions
`STEAMPH`	Calculate mass flow from pin-hole on the steam piping
`STGEFF`	Calculate multistage steam turbine isentropic efficiency
`STMDEPRESS`	Calculate depressurization steam volumn and hold time for steam accumulator
`TBNEFF`	Calculate steam turbine isentropic efficiency
`VENTURIGAS`	Gas Venturi tube sizing / differential pressure / flow rate calculation based on ISO 5167 Venturi meter (as cast convergent venturi tube). Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.
`VENTURILIQ`	Liquid Venturi tube sizing / differential pressure / flow rate calculation based on ISO 5167 Venturi meter (as cast convergent venturi tube). Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.
`VtoM`	Convert volumetric flow rate to mass flow rate at standard condition and normal condition Sm3/hr, Nm3/hr, SCFH

Schemas: list_tools.

Similar MCP servers

Official server.json

{
  "name": "com.engscript/mcp",
  "title": "EngScript Engineering MCP",
  "$schema": "https://static.modelcontextprotocol.io/schemas/2025-12-11/server.schema.json",
  "remotes": [
    {
      "url": "https://engscript.com/mcp",
      "type": "streamable-http"
    }
  ],
  "version": "1.0.0",
  "description": "Engineering calculation MCP server for oil and gas engineering applications."
}