Connect

8 clients · secrets stay placeholders

JSON (mcpServers)Claude CodeCodexOpenCodeCursorVS CodeGemini CLIGoose

{
  "mcpServers": {
    "buzzmebro": {
      "type": "http",
      "url": "https://buzzmebro.com/api/mcp"
    }
  }
}

claude mcp add --transport http buzzmebro https://buzzmebro.com/api/mcp

[mcp_servers.buzzmebro]
url = "https://buzzmebro.com/api/mcp"

{
  "$schema": "https://opencode.ai/config.json",
  "mcp": {
    "buzzmebro": {
      "type": "remote",
      "url": "https://buzzmebro.com/api/mcp",
      "enabled": true
    }
  }
}

{
  "mcpServers": {
    "buzzmebro": {
      "type": "http",
      "url": "https://buzzmebro.com/api/mcp"
    }
  },
  "deeplink": "cursor://anysphere.cursor-deeplink/mcp/install?name=buzzmebro&config=eyJ0eXBlIjoiaHR0cCIsInVybCI6Imh0dHBzOi8vYnV6em1lYnJvLmNvbS9hcGkvbWNwIn0%3D"
}

{
  "servers": {
    "buzzmebro": {
      "type": "http",
      "url": "https://buzzmebro.com/api/mcp"
    }
  }
}

{
  "mcpServers": {
    "buzzmebro": {
      "httpUrl": "https://buzzmebro.com/api/mcp"
    }
  }
}

extensions:
  "buzzmebro":
    enabled: true
    name: "buzzmebro"
    type: streamable_http
    uri: "https://buzzmebro.com/api/mcp"
    timeout: 300

Quality 86 / 100good

protocol75 · weight 25

warn
protocol.modernnewest supported version is 2025-11-25; 2026-07-28 not supported, older versions are deprecated until 2027-07-28
n/a
protocol.statelessonly applies to 2026-07-28 servers
pass
protocol.transportstreamable HTTP
n/a
protocol.list_ttlonly applies to 2026-07-28 servers

authorizationn/a · weight 15

n/a
auth.prm, auth.as_metadata, auth.cimdno remote uses OAuth
n/a
auth.secret_in_urlno templated URL

tool hygiene100 · weight 30

pass
tools.descriptionsevery tool has a description
pass
tools.description_lengthdescriptions are concise
pass
tools.schemasevery tool has an object input schema
pass
tools.annotations20 of 20 tools declare readOnlyHint or destructiveHint
pass
tools.directory_hintsevery tool declares readOnlyHint, destructiveHint, idempotentHint and openWorldHint
pass
tools.token_costabout 3,531 tokens to load every tool
pass
tools.api_dumptools are not a one-to-one API dump

stability75 · weight 15

warn
stability.changes18 tool changes in 30 days
pass
stability.rug_pullno tool changed its meaning under the same name

dependenciesn/a · weight 15

n/a
deps.known_vulns, deps.mcp_sdk_version, deps.resolvableno npm or PyPI package

20 tools, about 3,531 tokens to load them all · tool set 5c988733affa · tools last changed 2026-10-15 · checked 2026-10-20 10:35 UTC

Tool changes

2026-10-15partner_disable_sublinkadded
Switches off one tracked link: its code stops bringing new apartments. Apartments it already brought stay with the partner.
2026-10-15partner_create_sublinkadded
Adds a tracked link with its own code for one location, building or staff member (up to 50). Renters who use it count for this partner, with the same two-months-free perk.
2026-10-15partner_list_sublinksadded
Lists the extra tracked links (one per location, building or staff member) with each one’s visits, apartments and earnings. Every apartment and every dollar rolls up to the partner.
2026-10-15partner_get_kitchangeddescription
before
Returns ready texts, a resident email, desk card and move-in insert wording with the partner’s link, plus the house rules for sharing (honest words only, no pressure, never ask residents for phone numbers or door codes).
after · 74% of words in common
Returns ready texts, a resident email, a move-in text and email to forward to new tenants, desk card and move-in insert wording with the partner’s link, links to the partner’s printable move-in package (move-in insert and QR card PDFs with their own QR and code), plus the house rules for sharing (honest words only, no pressure, never ask residents for phone numbers or door codes).
2026-10-15partner_applychangedinput schema
2026-10-14partner_rotate_keychangeddescription
before
Revokes the current partner key and returns a new one (shown once). Use it if the key may have leaked.
after · 78% of words in common
Revokes the current partner key and returns a new one (shown once). Use it if the key may have leaked. The partner gets a text whenever the key is replaced.
2026-10-14partner_payout_linkchangeddescription
before
Returns a one-time link to a BuzzMeBro page that sends the person to Stripe’s own secure page, where THEY confirm their identity and add their bank. You never see or type bank details. Payouts start once they have at least $25 ready.
after · 67% of words in common
Returns a one-time link to a BuzzMeBro page that sends the person to Stripe’s own secure page, where THEY confirm their identity and add their bank. You never see or type bank details. Payouts start once they have at least $25 ready. First-time setup only: once payouts work, payout changes are made by the partner on their signed-in dashboard. The partner gets a text whenever this link is made.
2026-10-13partner_rotate_keyadded
Revokes the current partner key and returns a new one (shown once). Use it if the key may have leaked.
2026-10-13partner_payout_linkadded
Returns a one-time link to a BuzzMeBro page that sends the person to Stripe’s own secure page, where THEY confirm their identity and add their bank. You never see or type bank details. Payouts start once they have at least $25 ready.
2026-10-13partner_get_statsadded
Returns status, visits, signups, free months, paying apartments, collected revenue, earnings by state (on hold, ready, paid, reversed), the share ledger (apartments as codes only, never names or addresses) and payout history. Quote only these numbers.

Showing the latest 10. Full history: list_changes · trend: quality JSON.

Checks run on what our credential-free, read-only probes observe; tools are never called and no code audit is performed. How it is computed.

Trust 83 / 100

no-repository

provenance55

liveness100

freshness100

hygiene80

+dns-namespace +website +reachable +uptime-100% +updated-5d-ago -no-repository

Derived from observable signals (official registry feed and our own credential-free probes); no code audit performed. How it is computed.

Endpoints

remote	auth	reachable	uptime 30d	p50	protocol	last ok
`https://buzzmebro.com/api/mcp` streamable-http	none	yes	100%	629 ms	2025-11-25	2026-10-20

Tools (20)

`check_building`read-only	Checks whether BuzzMeBro can give this building a local buzzer number, and returns the price, the free-trial terms and how the service works. Call this first. Stores nothing and costs nothing.
`confirm_phone_code`	Checks the code the person read back to you. This proves the phone is theirs, which matters because that phone will open their front door. Five tries per setup. Next: start_checkout.
`create_setup`	Creates a BuzzMeBro setup for the person and returns setup_id and a status_token you must keep for every later call (plus setup_url, a fallback link if you cannot relay a texted code). Only call it after check_building said available and the person has asked you to set it up. No text message is sent and nothing is charged by this call. Next: send_phone_code.
`get_setup_status`	Reads how far the setup has got and says what to do next. Once the person has paid, this call gets their number; when status is "ready" it returns their new BuzzMeBro number and swap_the_buzzer: the steps to get the building to point the buzzer at that number, and ready-to-send messages for building management, the landlord, the concierge, the superintendent or a building portal.
`partner_apply`	Starts a partner application with the person’s details and returns application_id and application_token. Only call it when the person has asked to join. No text is sent by this call. Next: partner_send_code.
`partner_claim_key`	After the person accepted the terms: returns their partner link, code and partner key. The key is shown once; keep it private and use it for the partner_get_* tools. The application token stops working after this call.
`partner_confirm_code`	Checks the texted code. Five tries per application. Next: partner_terms_link.
`partner_create_sublink`	Adds a tracked link with its own code for one location, building or staff member (up to 50). Renters who use it count for this partner, with the same two-months-free perk.
`partner_disable_sublink`destructive	Switches off one tracked link: its code stops bringing new apartments. Apartments it already brought stay with the partner.
`partner_get_kit`read-only	Returns ready texts, a resident email, a move-in text and email to forward to new tenants, desk card and move-in insert wording with the partner’s link, links to the partner’s printable move-in package (move-in insert and QR card PDFs with their own QR and code), plus the house rules for sharing (honest words only, no pressure, never ask residents for phone numbers or door codes).
`partner_get_links`read-only	Returns the partner’s share link, typed code, a QR code (SVG) and their dashboard address.
`partner_get_stats`read-only	Returns status, visits, signups, free months, paying apartments, collected revenue, earnings by state (on hold, ready, paid, reversed), the share ledger (apartments as codes only, never names or addresses) and payout history. Quote only these numbers.
`partner_list_sublinks`read-only	Lists the extra tracked links (one per location, building or staff member) with each one’s visits, apartments and earnings. Every apartment and every dollar rolls up to the partner.
`partner_payout_link`	Returns a one-time link to a BuzzMeBro page that sends the person to Stripe’s own secure page, where THEY confirm their identity and add their bank. You never see or type bank details. Payouts start once they have at least $25 ready. First-time setup only: once payouts work, payout changes are made by the partner on their signed-in dashboard. The partner gets a text whenever this link is made.
`partner_program_info`read-only	Returns how the partner program works: the 50% share of collected revenue, what counts and what does not, when and how payouts happen, the rules, and the steps to join. Call it first and explain it to the person before applying. Stores nothing.
`partner_rotate_key`destructive	Revokes the current partner key and returns a new one (shown once). Use it if the key may have leaked. The partner gets a text whenever the key is replaced.
`partner_send_code`	Texts a 6-digit code to the mobile number in the application (never any other number). Ask the person to read it to you, then call partner_confirm_code. Each application gets 3 codes, at least a minute apart.
`partner_terms_link`	Returns a one-time link to the partner terms. Give it to the person: they read the terms and press Accept themselves. You cannot accept for them. When they say it is done, call partner_claim_key.
`send_phone_code`	Texts a 6-digit code to the mobile number given in create_setup (never to any other number). Tell the person a text is coming and ask them to read the code to you, then call confirm_phone_code. Call again only if it has not arrived after a minute; each setup gets 3 codes.
`start_checkout`	After confirm_phone_code: creates the person’s BuzzMeBro account and apartment and returns payment_url, Stripe’s own secure page where the person approves a card, Apple Pay, Google Pay or Link (with the free month when it applies, nothing is charged until it ends). Give them the link or message_for_the_person; you never see or type card details. Calling it again returns a fresh link for the same apartment.

Schemas: list_tools.

Similar MCP servers

Official server.json

{
  "name": "com.buzzmebro/buzzmebro",
  "title": "BuzzMeBro",
  "$schema": "https://static.modelcontextprotocol.io/schemas/2025-12-11/server.schema.json",
  "remotes": [
    {
      "url": "https://buzzmebro.com/api/mcp",
      "type": "streamable-http"
    }
  ],
  "version": "1.2.0",
  "websiteUrl": "https://buzzmebro.com/agents",
  "description": "More than one roommate on your apartment buzzer number; settings decide who rings. Canada."
}